- Abrasive Tools[1]
- Clamps[5]
- Anchors[1]
- Nuts[1]
- Screws[5]
- Mould Design & Processing Services[10]
- Household Scales[1]
- Pest Control[1]
- Emergency Lights[3]
- Downlights[1]
- Other Fabrication Services[7]
- Mobile Phone Chargers[3]
- 100% Cotton Fabric[4]
- 100% Polyester Fabric[1]
- Modal/Cotton Fabric[1]
- Pliers[6]
- Screwdriver[1]
- Wrench[1]
- Other Tools[3]
- Power Tool Accessories[2]
- Electric Drill[9]
- Electric Screwdriver[7]
- Hand Tool Sets[4]
- Power Tool Sets[1]
- Contact Person : Mr. Len Simon
- Company Name : Ningbo Shunjay Imp.& Exp. Co., Ltd.
- Tel : 86-0574-87119745
- Fax : 86-0574-87119730
- Address : Zhejiang,Ningbo,Rm1410, No.1 WANTE Business Center, No.487 YANGMUQI Road, High-tech zone Ningbo 315040 P. R. China
- Country/Region : China
4.8V multifunctional cordless screwdriver rechargeable power tool SHJS002
You can easily use this tool do it yourself (DIY)
Item no. SHJS002
Technical parameters:
Voltage: 4.8V
Speed: 180r/min
Forward/reverse switch
Max Torque: 3.5N.M
Chuck diameter capacity: 1/4"(6.35mm)
Rotary handle
LED work light and LED power indicator
Safety instructions
The following recommendations should be strictly complied with before the operating the tool in order to avoid damage to the equipment and hazard to the user.
1. Wear individual protection equipment if necessary (gloves, shoes, eye protectors, breathing filters, etc.).Do not wear jewels; protect long hair; wear close-fitting clothes.
2. Disconnect the charger when you do not use the latter, when you replace a tool or maintain the equipment.
3. Work in a clean and tidy room with sufficient lighting.
4. Place and store the tool in a dry place. Far from heat or dangerous vapor (best temp .is between 10 and 15).Do not operate the machine close to explosive substances or inflammable matter.
5. Use tools in good conditions, adapted to the task to be performed. this do-it-yourself equipment should be used as such and not be considered as heavy-duty equipment.
6. Do not work close to people. in particular children if work is hazardous. keep tools away from children during and after work.
7. Make sure body position is steady as you work. Remember that falls constitute an important source of accident.
8. When drilling metal sheets, use a vice and a block of wood placed under the sheet. rotating metal sheets show great hazard.
9. Make sure you do not use the drill or screwdriver on alive parts to avoid electric shock. make sure you locate any electric wire or cable inside the wall before using the tool.(a metal detector may be used for that purpose).Do not touch the chuck, socket or drill bit.
10. Do not try to open or disassemble the tool or the charger. Only a specialist using original parts and manufacturer’s drawings is allowed to service the tool.
11. should the charger be damaged(case, wires or plug)have it replaced immediately by the after-sales department.
12. This tool does not require special maintenance. The same applies to the electric part of the tool.
13. Plastic parts should be cleaned only after disconnecting the charger. Use a wet cloth and soft soap. Do not immerse the tool or the charger. The use of solvent, alcohol, petrol, etc is prohibited.
Please contact the after-sales department for complete cleaning of the tool.
Operation
CAUTION: The safety instructions should be read carefully before operating the tool.
Power supply:
Plug the supply connection into the screwdriver’s battery pack. After 5 hours charged, this tool can use.
Screwing/unscrewing:
The screwdriver is equipped with a forward/reverse switch (lever) to change chuck sense of rotation.
1. Clock wise, push the button
2. Anti-clock wise, push the button
To stop rotation, slacken the switch.
Maintenance
This screwdriver does not require special maintenance. The repair of internal parts of the tool or charger should be left with specialists (see safety instructions).
4.8V multifunctional cordless screwdriver rechargeable power tool SHJS002
